User`s guide

Copying 203
2. Place your original either on the document table or in the Auto Document Feeder. For
details, see "Setting Your Originals" on page 129.
3. Press the d Down button to select Zoom.
4. Specify your desired zoom ratio with either of the following methods.
Selecting a zoom ratio:
Press the l Left or r Right button several times until the desired fixed zoom ratio is
displayed.
The following document fixed zoom ratios are available:
Setting a zoom ratio:
You can also specify a magnification rate between 25% and 400% using the numeric
keypad.
Note:
If the l Left or r Right button is pressed after entering a magnification rate using the numeric
keypad, the closest fixed value to the entered rate is displayed.
Full-page copy
The full-page copy function is used to slightly reduce the output in order to fit the document
into the guaranteed print area of the product. Normally, the guaranteed printable area of a
photocopier is limited. Therefore, when a photocopier copies a document with text or
image printed on the whole sheet of paper, part of the text or image on the edges of paper
will not be copied. This function is enabled when On is selected.
1. Make sure that the product is in Copy mode. If not, press the Copy button to enter
the Copy mode.
2. Place your original either on the document table or in the Auto Document Feeder. For
details, see "Setting Your Originals" on page 129.
3. Press the d Down button twice to select Full Copy.
4. Press the l Left or r Right button to select between On and Off.
Zoom Ratio Settings Zoom
LGL > LT 78%
A4 > B5 86%
100% 100%
B5 > A4 115%
HLT > LG 154%
Downloaded from ManualsPrinter.com Manuals