User`s guide

Copying 198
1. Make sure the product is turned on and paper is loaded in the product. For information
on how to load paper, see "Loading Paper" on page 36.
2. Press the Copy button on the control panel.
The Copy light is lit and the LCD panel shows Copy Mode for a few seconds, and then
changes to the copy mode screen.
Note:
If no button is pressed for more than 3 minutes, any changes made are canceled and the mode
returns to the Print mode.
3. Place your original either on the document table or in the Auto Document Feeder. For
details, see "Setting Your Originals" on page 129.
4. Specify the desired copy settings as necessary. For details, see "Making Changes to
Copy Settings" on page 199.
Note:
When you press the x B&W Start or x Color Start button without making any settings here,
copying starts with the existing setting values.
5. Press the x B&W Start or x Color Start button.
To make a black-and-white copy, press the x B&W Start button. To make a color copy,
press the x Color Start button.
Copying starts.
Note:
❏ If you press the x B&W Start button twice in a row, copying starts faster than in the normal
mode. However, the print quality may be inferior to that in the normal mode.
❏ Do not turn off the power or press another mode’s button while copying is in progress, as
copying may be performed incorrectly.
Downloaded from ManualsPrinter.com Manuals