User`s guide

Using the PostScript Printer Driver 119
4. Select Local printer, then click Next.
Note:
Do not select the Automatically detect and install my Plug and Play printer check box.
5. Select the Create a new port check box and select Standard TCP/IP Port from the
drop-down list. Click Next.
6. Click Next to continue.
7. Specify the IP address and port name, then click Next.
8. Click Finish.
9. Click Have Disk in the Add Printer Wizard and specify the following path for the
CD-ROM. If your CD-ROM drive is D:, the path will be
D:\ADOBEPS\ENGLISH\WIN2K_XP\PS_SETUP. Then click OK.
Note:
Change the drive letter as needed for your system.
10. Select the printer and click Next.
11.Follow the on-screen instructions for the rest of the installation.
12.When installation is done, click Finish.
For Windows Me or 98 users
1. Install the EpsonNet Print. Refer to “Installing EpsonNet Print” in the Network Guide to
find the instructions.
2. Install the printer driver. See "Installing the PostScript printer driver for the USB
interface" on page 116 for details.
3. Set the printer port to EpsonNet Print Port. Refer to “Configuring the Printer Port” in
the Network Guide to find the instructions.
Note:
High-speed Printing (RAW) is not supported.
Accessing the PostScript printer driver
New :delete unnecessary information
You can access the PostScript printer driver directly from any application programs, from
your Windows operating system.
Downloaded from ManualsPrinter.com Manuals