User`s guide

Using the PostScript Printer Driver 118
11.Click Have Disk and specify the following path for the CD-ROM. If your CD-ROM drive
is D:, the path will be D:\ADOBEPS\ENGLISH\Folder Name\PS_SETUP
Then click OK.
Note:
❏ Change the drive letter as needed for your system.
❏ The folder name differs depending on your operating system version.
12.Select the printer, then click Next.
13. For Windows Me or 98, select USB as the port the printer is connected to, then click
Next.
For Windows XP, XP x64, or 2000, go to the next step.
14.Follow the on-screen instructions for the rest of the installation.
15.When installation is done, click Finish.
Installing the PostScript printer driver for the network interface
New :in cluding th e information about Windo ws 95 / Network is st andard or opti on
See the appropriate sections below according to your operating system, and follow the
instructions to install the PostScript printer driver for the network interface.
Note:
❏ Set the network settings before installing the printer driver. Refer to the Network Guide that
comes with your printer for details.
❏ Turn off all virus protection programs before installing the printer software.
For Windows XP, XP x64, or 2000 users
1. Make sure that the printer is turned on. Insert the printer software CD-ROM into your
CD-ROM drive.
2. For Windows XP, or XP x64, click Start, point to Printer and Faxes, and click Add a
printer in the Printer Tasks menu.
For Windows 2000, click Start, point to Settings, and click Printers. Then double-click
the Add Printer icon.
3. The Add Printer Wizard appears. Then click Next.
Operating system version Folder Name
Windows Me or 98 WIN9X
Windows XP, XP x64, or 2000 WIN2K_XP
Downloaded from ManualsPrinter.com Manuals