User`s guide

Using the Printer Software with Macintosh 112
Notice Settings
To make specific monitoring settings, access EPSON Status Monitor and select Notice
Settings from the file menu. The Notice Settings dialog box appears.
Setting Up the USB Connection
Note:
If you are connecting the USB cable to your Macintosh through a USB hub, be sure to connect
using the first hub in the chain. The USB interface may be unstable depending on the hub used. If
you experience problems with this type of setup, connect the USB cable directly to your computer’s
USB connector.
a. Printer drop-down list (Mac OS X
only):
Select your printer from the drop-down list.
b. Monitor the printer status check
box:
When this check box is selected, EPSON Status Monitor
monitors the printer status during a print job is
processed.
c Pop-up Notice: Sets the notification to be displayed.
d. Monitor Settings button: Displays the Monitor Settings dialog box to set the
monitoring interval.
e. OK button: Click this button to save the settings and to exit the
dialog box.
f. Cancel button: Click this button to exit the dialog box without saving
the settings.
g. Save button (Mac OS X only): Saves new changes and closes the dialog box.
Downloaded from ManualsPrinter.com Manuals