User`s guide

Specify the scan type.
❏ Resolution
Specify the resolution.
❏ Scale
Specify the enlargement or reduction ratio for the selected area.
Note:
If the resolution is set at 1200
× 1200dpi or higher, a setting larger than 100% cannot be specified.
❏ Scanning Mode
Select Auto or Manual. When Manual is selected, a tab appears so that detailed settings can be
specified, for example, for Brightness/Contrast and Filter.
Note:
❏ The parameters that can be set differ depending on the scanning mode that is selected.
❏ If Auto is selected as the scanning mode, scanning from the original glass is performed after a prescan
is performed so that a preview image can be checked.
❏ Image size
Shows the data size of the scan image.
❏ Rotation
Select the orientation of the image to be scanned.
❏ Close
Click to close the TWAIN driver window.
❏ Prescan
Click to begin scanning a preview image.
❏ Scan
Click to begin scanning.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Scanner 91
Downloaded from ManualsPrinter.com Manuals