Setup guide

Using the Printer Software with Windows 71

9. After printing on one side, reload the paper into the MP tray

with the printed surface face-down as shown below. Then,

press the x B&W Start or x Color Start button.

Note:

❏ Manual duplex printing may not be completed normally when

printing a document for which the paper size, orientation, or paper

source setting is set to change in the document.

❏ When doing duplex printing manually with collate set on the printer

driver, the printing may not be completed normally depending on

the application you use.

❏ When loading the paper, straighten it well. If curled paper is loaded,

it may not be fed correctly.