Setup guide

Copying Problems 429
15
15
15
15
15
15
15
15
15
15
15
15
Black vertical lines appear on the scanned
image or the image is all black.
Make sure if the transportation lock on the left side of the
document table is set in the unlocked position. The
transportation lock must always be set in the unlocked
position except when transporting the product. See “Scan
Settings” on page 302.
The scanned area is inappropriate.
Make sure if the transportation lock on the left side of the
document table is set in the unlocked position. The
transportation lock must always be set in the unlocked
position except when transporting the product. See “Scan
Settings” on page 302.
A blank copy is output even though an original
is set on the Auto Document Feeder during
scanning.
Check if the ADF unit or ADF cover is closed firmly.