Setup guide

Scanning 161
6
6
6
6
6
6
6
6
6
6
6
6
2. Insert a stack of documents face-up in the Auto Document
Feeder until it meets resistance, and then move the edge
guides so they are flush with the edges of your documents.
Note:
❏ Make sure the ADF cover is closed firmly. If the ADF cover is open,
the document table is preemptively scanned and a blank copy is
output even if an original is set on the Auto Document Feeder.
❏ If you load multiple pages in the Auto document Feeder, the pages
will be fed from the top and then ejected face-down.