Setup guide
92 Using the Printer Software with Windows
Note for Netware users:
When monitoring NetWare printers, a Novell Client that corresponds
to your operating system must be used. Operation is confirmed for the
versions below:
❏ For Windows Me, 98, or 95:
Novell Client 3.4 for Windows 95/98
❏ For Windows XP, 2000, or NT 4.0:
Novell Client 4.9 for Windows NT/2000/XP
❏ To monitor a NetWare printer, connect only one print server to each
queue. For directions, see the Network Guide for the printer.
❏ You cannot monitor a NetWare queue printer beyond the IPX router
because the setting for IPX hops is 0.
❏ This product supports NetWare printers configured by a
queue-based printing system such as Bindery or NDS. You cannot
monitor NDPS (Novell Distributed Print Services) printers.
Installing EPSON Status Monitor 3
Follow the steps below to install EPSON Status Monitor 3.
1. Make sure that the printer is off and that Windows is running
on your computer.
2. Insert the printer software CD-ROM in the CD-ROM drive.
Note:
❏ If the language selection window appears, select your country.
❏ If the Epson Installation Program screen does not appear
automatically, double-click the My Computer icon,
right-click the CD-ROM icon, click OPEN in the menu that
appears, then double-click Epsetup.exe.