Setup guide

Functions of the Control Panel 339
B
B
B
B
B
B
B
B
B
B
B
B
1. When the printer’s Ready light is on, press any of the control
panel buttons shown below accesses the control panel menus.
2. Use the Up and Down buttons to scroll through the
menus.
3. Press the Enter button to view the items in a menu.
Depending on the menu, the LCD panel displays an item and
the current setting separated ( YYYY=ZZZZ), or only an item
( YYYY).
4. Use the Up and Down buttons to scroll through the
items, or press the l Back button to return to the previous level.
5. Press the Enter button to carry out the operation
indicated by an item, such as printing a status sheet or
resetting the printer, or to view the settings available for an
item, such as paper sizes or emulation modes.
Use the Up and Down buttons to scroll through
available settings, then press the Enter button to select a
setting and return to the previous level. Press the l Back
button to return to the previous level without changing the
setting.
Note:
You need to turn the printer off and then on to activate some settings.
For details, see “Control Panel Menus” on page 342.
6. Press the N Start/Stop button to exit the control panel menus.