Setup guide

224 Maintenance and Transportation
Chapter 7
Maintenance and Transportation
Replacement Messages
When you see the following messages on the LCD panel or the
window of EPSON Status Monitor 3, replace the appropriate
consumable products. You can continue to print for a short time
after a message appears, but Epson recommends early
replacement to maintain print quality and extend the life of your
printer.
Note:
To clear the warning, select Clear All Warning from the control
panel’s Reset Menu.
LCD Panel Message Description
Worn Photoconductor The photoconductor unit is near the end of its
service life. You need to prepare a new
photoconductor unit.
Waste T BoxNearfull The waste toner collector is near full of toner.
You need to prepare a new waste toner
collector.