Setup guide

Setting Up Your Printer on a Network 171
5
5
5
5
5
5
5
5
5
5
5
5
Using an additional driver
When the print server’s OS is Windows XP, 2000, NT 4.0, or Server
2003, you can install the additional drivers on the server. The
additional drivers are for client computers that have different OS
from the server.
Follow the steps below to set a Windows XP, 2000, NT 4.0, or
Server 2003, as a print server, then install the additional drivers.
Note:
❏ You must access Windows XP, 2000, NT 4.0, or Server 2003, as
the Administrators of the local machine.
❏ If the print server’s OS is Windows NT 4.0, the additional driver
can be used only on Service Pack 4 or later.
1. For a Windows 2000 or NT 4.0 print server, click Start, point
to Settings, then click Printers.
For a Windows XP or Server 2003 print server, click Start,
point to Printers and Faxes.
2. Right-click your printer’s icon, then click Sharing in the menu
that appears.
For Windows XP or Server 2003, if the following menu
appears, click either Network Setup Wizard or If you
understand the security risks but want to share printers
without running the wizard, click here.
In either case, follow the on-screen instructions.