Setup guide

324 Troubleshooting
K Toner Cart Out
See “XXXX Toner Cart Out” on page 330.
K Toner Low
See “XXXX Toner Low” on page 331.
K Toner Out
See “XXXX Toner Out” on page 331.
Manual Feed xxx
The manual feed mode is specified for the current print job. Make
sure the paper size indicated by xxx is loaded, then press the N
Start/Stop
button.
For details on the manual feed mode, see “Manually feeding
paper” on page 26.
Mem Overflow
The printer has insufficient memory to execute the current task.
Press the N Start/Stop
button on the control panel to resume
printing. Or press the q Job Cancel button to cancel the print job.
To prevent this problem from happening again, decrease the
printing resolution or add more memory to your printer as
described in “Memory Modules” on page 232.
Menus Locked
This message appears if you try to change the printer’s settings
through the control panel when the buttons are locked. You can
unlock them by using the EPSON WinAssist or WebAssist utility.
Refer to the Administrator’s Guide for information.
M Toner Cart Out
See “XXXX Toner Cart Out” on page 330.