Setup guide

196 Functions of the Control Panel
USB I/F
Allows you to activate or deactivate the USB interface.
Buffer Size
Determines the amount of memory to be used for receiving data
and printing data. If Maximum is selected, more memory is
allocated for receiving data. If Minimum is selected, more memory
is allocated for printing data.
Note:
❏ To activate Buffer Size settings, you must turn off the printer for
more than five seconds then turn it back on. Or, you can perform a
Reset All operation, as explained in “Reset Menu” on page 193.
❏ Resetting the printer erases all print jobs. Make sure the Ready
light is not flashing when you reset the printer.
Network Menu
See the Administrator’s Guide for each setting.
AUX Menu
See the Administrator’s Guide for each setting.