Setup guide

Functions of the Control Panel 169
6
6
6
6
6
6
6
6
6
6
6
6
1 LCD panel: Displays printer status messages and
control panel menu settings.
2, 3,
4, 5
Up/Enter/Down/
Back buttons:
Use these buttons to access the control
panel menus, where you can make
printer settings and check the status of
consumable products. For instructions
on how to use each button, see “Using
the Control Panel Menus” on page 170.
6 Job Cancel button: Press once to cancel the current print job.
Press down for more than two seconds
to delete all jobs from the printer
memory, including jobs the printer is
currently receiving, saving to the Hard
Disk Drive, or printing.
7
Start/Stop button: Switches the printer between ready and
offline status.
When the error light is flashing, pressing
this button clears the error and switches
the printer to ready status.
8 Ready light: On when the printer is ready, indicating
that the printer is ready to receive and
print data.
When the printer is not ready, this light
is off.
9 Error light: On or flashes when an error has
occurred.