Setup guide

4
Important Safety Instructions
❏ Connect your printer to an electrical outlet that meets the
power requirements of this printer. Your printer’s power
requirements are indicated on a label attached to the printer.
If you are not sure of the power supply specifications in your
area, contact your local power company or your dealer.
❏ If you are unable to insert the AC plug into an electrical outlet,
contact an electrician.
❏ Adjust only the controls mentioned in the manual. Adjusting
other controls can damage your printer.
ENERGY STAR
®
Compliance
As an International ENERGY STAR
®
Partner, EPSON has determined that this
product meets the International
ENERGY
STAR
®
Program guidelines for energy
efficiency. The International
ENERGY
STAR
®
Office Equipment Program is a voluntary partnership
with the computer and office equipment industry to promote the
introduction of energy-efficient personal computers, monitors,
printers, fax machines, copiers, and scanners, in an effort to
reduce air pollution caused by power generation.
Power On/Off Cautions
Do not turn off the printer under the following conditions:
❏ For at least 30 seconds after turning on the printer. Wait until
Ready appears on the LCD panel.
❏ While the Ready light is flashing.