User`s guide

Loading Letterhead in the Single Sheet Feeder (SSF)
When you use the SSF letterhead enters the printer first with the print side facing down.
Using the Single Sheet Feeder (SSF)
❏ Load only one size and type of print media during a single print job.
❏ To achieve the best possible print quality, use only high-quality print media that is designed for use
in laser printer. For more guidelines on print media, see “Print Media Usage Guidelines” on
page 67.
❏ Do not add or remove print media when the printer is printing from the SSF. This may result in a
paper jam.
❏ Print media should be loaded with the recommended print side down and the top of the print
media going into the SSF first.
❏ Do not place objects on the SSF. Also, avoid pressing down or applying excessive force on it.
❏ The icons on the SSF show how to load the SSF with paper, and how to turn an envelope for
printing.
Setting Paper Sizes and Types
When loading print media in the standard 250-sheet tray and optional 250-sheet paper cassette unit,
set the paper size and type on the operator panel before printing.
Note:
When loading print media in the SSF, use the print driver to set the paper size and type. For more
information, refer to the online help of the driver.
This section describes how to set the paper size and type on the operator panel.
Epson AcuLaser C2900 Series User’s Guide
Printing Basics 81
Downloaded from ManualsPrinter.com Manuals