User`s guide

Power Saver Mode
The printer has a power saving feature that reduces power consumption during periods of inactivity.
This feature operates in two modes: the Low Power mode and Sleep mode. As delivered, the printer
switches to the Low Power mode three minutes after the last print job is printed. The printer then
switches to the Sleep mode after another six minutes of inactivity. When the printer is in the Low
Power mode, the LCD backlight turns off. In the Sleep mode,
(Energy Saver) button lights up. The
display also goes blank and displays nothing.
The factory default settings of three minutes (Low Power mode) and six minutes (Sleep mode) are
changeable within the range of 3 to 60 minutes (Low Power mode) and 1 to 6 minutes (Sleep mode).
The printer returns to the ready-to-print state in about 30 seconds when re-activated.
See Also:
“Setting the Power Saver Time Option” on page 140.
Exiting the Power Saver Mode
The printer automatically exits the Power Saver mode when it receives a print job from a computer. To
manually exit the Low Power mode, press any button on the operator panel. To exit the Sleep mode,
press the
(Energy Saver) button.
Note:
❏ Opening and closing a cover will cause the printer to exit the Low Power mode and the Sleep mode.
❏ When the printer is in the Sleep mode, all buttons on the operator panel except for the
(Energy
Saver) button do not function. To use the buttons on the operator panel, press the
(Energy Saver)
button to exit the Sleep mode.
See Also:
“Setting the Power Saver Time Option” on page 140.
Epson AcuLaser C2900 Series User’s Guide
Basic Operation 34
Downloaded from ManualsPrinter.com Manuals