User`s guide

Installing the Feed Roll Unit in the Standard 250-Sheet Tray
1. Align the new feed roll unit with the groove on the axle.
2. Insert the feed roll unit into the axle until it snaps. The protrusions fit completely into the slots and
the roller hook reseats into the groove on the axle.
3. Load paper in the standard 250-sheet tray, and then insert the standard 250-sheet tray into the
printer and push until it stops.
Important:
Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.
Epson AcuLaser C2900 Series User’s Guide
Maintenance 221
Downloaded from ManualsPrinter.com Manuals