User`s guide

Message What You Can Do
Waste Full
Black Cartridge
Open the side cover. Remove the used black cartridge, and install a new car-
tridge.
Insert
Drum Cartridge
Open the front cover, and make sure that the drum cartridge is fully installed.
XXXXXXXXXXXXXXXX
CTD Sensor
Clean the CTD sensor.
Check Unit
CTD Sensor
Low Density
Yellow Cartridge
Remove and shake the yellow cartridge. Contact customer support if this failure
is repeated.
Low Density
MagentaCartridge
Remove and shake the magenta cartridge. Contact customer support if this
failure is repeated.
Low Density
Cyan Cartridge
Remove and shake the cyan cartridge. Contact customer support if this failure is
repeated.
Low Density
Black Cartridge
Remove and shake the black cartridge. Contact customer support if this failure is
repeated.
Blk - CRUM Error
Restart Printer
Error 093-925
Restart Printer
Turn off the printer. Confirm the black cartridge is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
Invalid Black Open the side cover. Remove the unsupported black cartridge, and install a
supported cartridge.
Y - CRUM Error
Restart Printer
Error 093-950
Restart Printer
Turn off the printer. Confirm the yellow cartridge is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
Epson AcuLaser C2900 Series User’s Guide
Troubleshooting 195
Downloaded from ManualsPrinter.com Manuals