User`s guide

Problem Action
The printed result has ghosting. If the type of the ghosting is positive ghost:
Replace the drum cartridge if you have a spare cartridge.
See Also:
❏ “Replacing the Drum Cartridge” on page 210
❏ “Installing the Drum Cartridge” on page 212
If the problem persists, contact the Epson local representative office or an
authorised dealer.
If the type of the ghosting is negative ghost:
Verify that the print media recommended for the printer is being used.
If you are using non-recommended print media, use the print media
recommended for the printer.
If the problem is solved, adjust the transfer bias.
If the problem persists, replace the drum cartridge if you have a spare cartridge.
Adjust the transfer bias.
1. On the operator panel, press the
(Menu) button and select Admin Menu —
Maintenance Mode — Adjust BTR.
2. Adjust the setting for the type of print media being used.
If the problem persists, contact the Epson local representative office or an
authorised dealer.
Light-Induced Fatigue
Epson AcuLaser C2900 Series User’s Guide
Troubleshooting 174
Downloaded from ManualsPrinter.com Manuals