User`s guide

❏ Push the tray in firmly after loading.
❏ Ensure that all cables that connect to the printer are correctly attached.
❏ Overtightening the guides may cause jams.
❏ Wipe the feed roll in the tray or SSF with a cloth that is slightly dampened with water if jams caused
by misfeeding paper occur frequently.
See Also:
❏ “About Print Media” on page 67
❏ “Supported Print Media” on page 69
Identifying the Location of Paper Jams
c
Caution:
Do not attempt to remove a paper jammed deeply inside the product, particularly a paper wrapped
around a Fuser Unit or a heat roller. Otherwise, it may cause injuries or burns. Switch off the
product promptly and contact your local Epson representative.
Important:
Do not attempt to clear any jams using tools or instruments. This may permanently damage the printer.
The following illustration shows where paper jams may occur along the print media path.
1
3
5
2
4
6
Epson AcuLaser C2900 Series User’s Guide
Troubleshooting 143
Downloaded from ManualsPrinter.com Manuals