User`s guide

Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does
not match the paper size settings for the current job.
Values:
Off*
No tray size substitute accepted.
Larger Size
Substitutes paper of next largest size. When there is no larger paper size, the
printer substitutes paper of nearest size.
Closest Size
Substitutes paper of nearest size.
Auditron Mode
Purpose:
To specify whether to limit the functions that can be used per user by Auditron authentication.
Values:
Off*
Does not limit functions by Auditron authentication.
On
Limits functions by Auditron authentication.
No Acct User Prt
Purpose:
To specify whether to permit the printing of data without authentication information.
Values:
Off*
Does not permit non-account user to print the data.
On
Permits non-account user to print the data.
LetterH Dup Mode
Purpose:
To specify whether to print on both sides when you use letterhead.
Epson AcuLaser C2900 Series User’s Guide
Using the Operator Panel Menus 126
Downloaded from ManualsPrinter.com Manuals