User`s guide

Port9100 Disable
Disables the Port9100 port.
Enable*
Enables the Port9100 port.
IPP Disable
Disables IPP port.
Enable*
Enables IPP port.
SMB (TCP/IP) Disable*
Disables SMB TCP/IP port.
Enable
Enables SMB TCP/IP port.
WSD Disable
Disables WSD port.
Enable*
Enables WSD port.
SNMP (UDP/IP) Disable
Disables the Simple Network Management Protocol (SNMP) UDP port.
Enable*
Enables the SNMP UDP port.
StatusMessenger Disable
Disables the E-Mail Alert feature.
Enable*
Enables the E-Mail Alert feature.
InternetServices Disable Disables an access to EpsonNet Config embedded in the printer.
Enable* Enables an access to EpsonNet Config embedded in the printer.
Bonjour(mDNS) Disable
Disables Bonjour (mDNS).
Enable*
Enables Bonjour (mDNS).
HTTP-SSL/TLS Disable
Disables HTTP-SSL/TLS.
Enable*
Enables HTTP-SSL/TLS.
IP Filter
Note:
IP Filter feature is available only when Protocol is set to LPD or Port9100.
Purpose:
To block data received from certain IP addresses through the wired network. You can set up to five IP
addresses. The change becomes effective after the printer is turned off and then on again.
Values:
No. n / Address (n is 1–5.)
Sets the IP address for Filter n.
Epson AcuLaser C2900 Series User’s Guide
Using the Operator Panel Menus 117
Downloaded from ManualsPrinter.com Manuals