User`s guide

Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Output Color
Purpose:
To specify the color mode to Color or Black and White. This setting is used for a print job that does
not specify a print mode.
Values:
Black and White*
Prints in the black and white mode.
Color
Prints in the color mode.
PS Settings
Use the PS Settings menu to change printer settings that only affect jobs using the PostScript
emulation printer language.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether to print the contents of PostScript errors.
Values:
Off
Dose not print the PS error report.
On*
Prints the PS error report.
PS Job Time-out
Purpose:
To specify the runtime of one PostScript job.
Epson AcuLaser C2900 Series User’s Guide
Using the Operator Panel Menus 113
Downloaded from ManualsPrinter.com Manuals