User`s guide

As an example, this section describes how to add a printer in a Mac OS X 10.5.

1. When using a USB port, execute the following procedure. If not using a USB port, proceed to Step

1) If the USB cable is connected, temporarily disconnect it.

2) Make sure the computer is turned on, and the printer is turned off.

3) Connect the printer and the computer with the USB cable.

4) Turn ON the power of the printer.

2. Make sure the printer port is set to Enable.

❏ When using IP Printing

Set the LPD port to Enable.

Note:

Printers on an IP network can be detected automatically. To enable the discovery function, start

[Bonjour].

❏ When using [USB-1(2.0)] / [USB-2(2.0)]

Set the USB port to Enable.

To enable the USB port, see the documentation that came with your printer. Depending on the

model being used, specification of the print mode may be unnecessary.

3. Start [System Preferences].

Epson AcuLaser CX29/C2900 Series PostScript User’s Guide

Installing of Print Drivers for Macintosh Computers 27