User`s guide

12. Select [Do not share this printer] and click [Next].
Note:
We recommend that you install the driver on each computer with the procedure appropriate to the
Operating System.
13. Specify whether to print a test page, and click [Next].
14. After confirming the settings displayed, click [Finish].
Note:
If the dialog box “Digital Signature Not Found” appears, click [Yes] to continue the installation.
Installation begins.
15. Confirm that the printer has been added in the Printers window.
This completes the installation of the print driver. Remove the Software Disc from the drive.
After the installation is complete, all the optional accessories that are installed to the printer must be
set up. Display the properties dialog box of the printer, select the [Device Settings] tab, and display
[Installable Options] to set up.
Store the Software Disc in a safe place.
Using [Add a printer] and Installing
- Windows Vista/Windows Server 2008
This section describes the installation procedure for Windows Vista and Windows Server 2008. In this
manual, Windows Vista is used as an example.
Note:
To cancel the installation of the print driver during installation, click [Cancel] in the dialog box. You can
also click [Back] to delete the settings in that dialog box and return to the previous dialog box.
1. Start Windows Vista.
Note:
Make sure that you are logged in as an Administrator.
2. On the [Start] menu, select [Control Panel].
Epson AcuLaser CX29/C2900 Series PostScript User’s Guide
Installing of Print Drivers for Windows Computers 12