User`s guide

10. Click [Finish] to exit the wizard when the "Congratulations!" screen appears. If necessary, click
[Print Test Page] to print a test page.
Using [Add a printer] and Installing
- Windows XP/Windows Server 2003
The section described the installation procedure for Windows XP, and Windows Server 2003. In this
manual, Windows XP is used as an example.
Note:
To cancel installation of the print driver during installation, click [Cancel] in the dialog box. You can
also click [Back] to delete the settings in that dialog box and return to the previous dialog box.
1. Start Windows XP.
Note:
Log in as a user of an Administrator group. Refer to the Windows XP documentation for details
about the Administrator group.
2. On the [Start] menu, click [Printers and Faxes].
3. In the Printers and Faxes window, click [Add a printer].
Note:
For Windows Server 2003, select [Add a printer] in [Printer Tasks].
4. Click [Next].
5. Select how the printer is connected to the computer and click [Next].
Select [Local printer attached to this computer] if the printer is connected directly to the computer
or to the network in a TCP/IP(LPD) environment. Otherwise, select [A Network printer, or a
printer attached to another computer]. The following is an example of a Local printer.
Note:
❏ When you select [Local printer attached to this computer], deselect the [Automatically detect
and install my Plug and Play printer] check box.
❏ Specify the target printer in the Connect to printer dialog box if you selected [A network printer,
or a printer attached to another computer].
6. Select the port you are using and click [Next].
Epson AcuLaser CX29/C2900 Series PostScript User’s Guide
Installing of Print Drivers for Windows Computers 10