Setup guide

Testing and Connecting the Printer

For Testing the Printer

Loading paper

Fan a stack of A4 or Letter size paper, then tap it on a flat surface

to even the edges. Load the paper in the MP tray.

Printing a status sheet

1. Turn on the printer. After about three minutes, the display

shows Ready.

2. Press the Enter button twice. The printer starts printing a

status sheet.

3. Check that information on the options installed in the printer

is correct. If the printer properly recognizes an installed

option, the option’s name appears under Hardware

Configurations.

If the printer cannot print a status sheet, or if you are unable to

get the printer to print a correct status sheet, contact your dealer.

printable surface down

slide