Setup guide

Testing and Connecting the Printer
33
6
Testing and Connecting the Printer
Plugging in the Printer
1. Make sure that you have the correct power cord for your
power source.
c
Caution:
It is not possible to change the printer’s voltage. If the
required voltage and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the power
cord.
2. Attach the power cord as shown below.
c
Caution:
Avoid using an electrical outlet that is controlled by wall
switches or automatic timers. Accidental disruption of power
can erase valuable information in your computer’sand
printer’smemory.
3. Plug the power cord into a properly grounded electrical
outlet.
AC inlet
See the required
voltage here
OFF