User`s guide

System and Memory Requirements
For the scanner and your software to work properly, your
system must include the following minimum configuration:
D Apple® Macintosh or Power Macintosh™ computer with a
68030 or 68040 processor
P Apple system software 7.0 or higher
Q 8MB of system RAM; 4MB of application RAM
Note:
8MB is the minimum amount of RAM; graphics applications run
faster and more efficiently with at least 12MB of RAM.
0 At least 100MB of free hard disk space for scanner
applications and images, depending on the size of the
images
0 A color monitor (one with a 24-bit video card is
recommended)
4 For PhotoDeluxe, a double-speed or faster CD-ROM drive.
Setting Up the Scanner
Follow these steps to set up the scanner:
1. Take the scanner out of its box and place it on a flat, stable
surface with the rear panel facing you.
2. Remove the tape securing the scanner cover and pull out
the paper underneath the cover.
2