User's Manual
Table Of Contents
- FRONT MATTER
- TABLE OF CONTENTS
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-USING PRINTER OPTIONS
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLESHOOTING
- CHAP 7-TECHINICAL SPECIFICATIONS
- CHAP 8-COMMAND SUMMARY
- APPENDIX
- GLOSSARY
- INDEX

Transporting the Printer
If you need to transport your printer some distance, carefully
repack it using the original box and packing materials, as described
below:
1.
2.
3.
4.
5.
6.
7.
8.
Turn off the printer.
Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
Remove the paper guide.
Remove the optional pull tractor and cut-sheet feeder or feeders,
if installed.
Remove the ribbon cartridge.
Remove the paper-tension unit. Attach the protective locking
clip to the paper-tension unit, and then replace the paper-tension
unit. See page 1-5.
Make sure the standard tractor is installed in the push-tractor
position.
Repack the printer, ribbon cartridge, paper guide, and power
cord in the original packing materials and place them in the
printer’s original box.
5-4 Maintenance and Transportation