User's Manual

Table Of Contents

Cut-Sheet Feeders

Two cut-sheet feeders are available for use with your printer:

Single-bin High-capacity

ActionPrinter 5000

C80637*

C80638*

ActionPrinter 5500

C80639* C80640*

* Substitute for last digit, which varies by country.

The single-bin cut-sheet feeder holds up to 50 single sheets of paper

and the high-capacity cut-sheet feeder holds up to 150 sheets of

paper or up to 25 envelopes.

By connecting both cut-sheet feeders, you can operate them as a

double-bin cut-sheet feeder (see Assembling the double-bin cut-sheet

feeder). This allows you to load two different types of paper

automatically.

Assemble the cut-sheet feeder by following the instructions in the

manual that comes with it.

Installing a cut-sheet feeder

You follow the same steps to install either the single-bin or high-

capacity cut-sheet feeder:

1. Make sure the printer is turned off. Remove the paper guide and

printer cover.

2. If the standard tractor is installed in the pull-tractor position,

remove it and re-install in the push-tractor position. If the

optional pull tractor is installed, remove it. In either case, make

sure the paper-tension unit is installed.

Note:

Store the paper guide and optional pull-tractor in a safe place;

you will need them if you remove the cut-sheet feeder.

If you install the single-bin cut-sheet feeder, you need to re-

install the paper guide after you load the paper.

4-2 Using Printer Options