User's Manual

Assembling the Printer
6. Replace the paper-tension unit by placing it on the printer’s
mounting pegs; then lower the front of the unit into place. Press
on the front of both sides of the paper-tension unit until you
feel it click into place.
7. Replace the printer cover by first inserting the front tabs into
the slots on the printer; then lower it into place.
Note: You install the optional #7768 or #7770 film ribbons in
the same way as you install the ribbon cartridge. However, you
should follow the guidelines below when using a film ribbon:
l Print on ordinary paper only.
l Move the paper-thickness lever to the next lowest position.
1-8
Setting Up the Printer