User`s guide

Installing and Using Options

Single-bin Cut-Sheet Feeder

The optional Single-bin Cut-Sheet Feeder (C80637

✽

) handles

up to 50 sheets of standard bond paper ( 82 g/m

or 22 lb)

without reloading. Follow these steps to install the cut-sheet

feeder:

1. Make sure the printer is turned off. Remove the paper guide.

2. If the tractor is installed in the pull-tractor position, remove

it and reinstall it in the push-tractor position.

3. Make sure the paper-release lever is in the single-sheet

position.

4. Hold the cut-sheet feeder in both hands and press on the

latch levers. Fit the notches in the cut-sheet feeder over the

mounting posts on the printer. Releasing the latch levers

locks the cut-sheet feeder in place.

2-17

Blackberry REV.D

A5 size Chapter 2

96/04/08 pass 1

Using the Printer

2-29