User`s guide

Using the Printer Setting Mode
Your printer has internal settings that control simple functions
such as the page length and character set. These settings take
effect each time you turn on the printer, so they are also called
default settings.
For most users, the factory settings are best, but you can change
these settings if necessary. The table below lists all the settings
you can change.
Function Options
Character table* PC437, PC850, PC860, PC863, PC865,
PC861, BRASCII, Abicomp
Page length 11, 12, 8.5, 70/6 inches
Skip-over-perforation On, Off
Auto tear off On, Off
Graphic print direction Unidirectional, Bidirectional
Software ESC/P 2, IBM X24E
AGM On, Off
Auto line feed On, Off
Interface Auto (10 sec. wait), Auto (30 sec. wait),
Parallel, Serial
Bit rate 300, 600, 1200, 2400, 4800, 9600,
19200 bps
Parity bit None, Odd, Even
Data length 7 bit, 8 bit
EXT/ACK Disable, Enable
State reply On, Off
* In certain areas, the following character tables are available:
PC437, PC850, PC864, PC437 Greek, PC852, PC853, PC855, PC857,
PC866, PC869, ISO Latin 1T, ISO 8859-7, Code MJK, MAZOWIA, Bulgaria
Note:
Because software settings always override the printer’s default
settings, use your software program to control the printer, if possible.
See your software documentation for more information.
L
Blackberry REV.D
A5 size Chapter 2
96/04/08 pass 1
2-22
Using the Printer