User`s guide

1. Turn the printer off and open the cover. The paper-thickness
lever is on the left side of the printer. The numbers next to
the lever indicate the thickness setting. For normal use, the
lever should always be set to position 0.
2. Use the table below to select the appropriate paper thickness.
Paper type Lever position
(Reserved) –1
Standard paper (single sheets or continuous) 0
Multi-part forms 2-sheet 1
3-sheet 2
4-sheet 3
Envelopes 20 lb 4
24 lb 5
(Reserved) 6
3. Close the cover. When you finish printing, move the
paper-thickness lever back to position 0.
Note:
When you choose lever positions 2
−
6, the print speed is reduced.
5
4
6
3
2
1
2-16
L
Blackberry REV.D
A5 size Chapter 2
96/04/08 pass 1
2-18
Using the Printer