User`s guide

4. Make sure your paper has a clean, straight leading edge.
Open the sprocket covers. Fit the first holes of the paper
over the sprocket pins and then close the sprocket covers.
Slide the right sprocket unit to remove any slack in the
paper and lock it in place. Now the paper is in the
paper-park position.
c
Caution:
Use the knob on the right side of the printer only to clear
paper jams and only when the printer is off. Otherwise,
you may damage the printer or change the top-of-form
position.
Note
:
Make sure your paper supply is positioned within 1 meter
(3 feet) of the printer.
2-07
L
Blackberry REV.D
A5 size Chapter 2
96/04/08 pass 1
2-10
Using the Printer