User`s guide

Using the Control Panel
You can control simple printer operations—such as line
feeding, form feeding, loading and ejecting paper, and selecting
fonts—with the buttons on the control panel. The control panel
lights show the printer’s status and the current font.
Lights and buttons
Pause
light
The orange
Pause
light is on when the printer stops printing.
Each time you turn on the printer, the light flashes briefly.
When the printer is out of paper, the light flashes and the
beeper sounds three times. The light also flashes when you can
tear off the last sheet of continuous paper at the edge of the
printer cover.
The
Pause
light goes on and the beeper sounds if an error
occurs.
Font 1
and
Font 2
lights
The green
Font
lights, 1 and 2, indicate the current font setting.
For more about selecting fonts, see page 2-4.
While in the micro adjust mode, the
Font
lights flash. See
“Adjusting the loading position” on page 2-5.
PauseLF/FFFont
Paper Park
12
Prestige
Script
Draft
Draft Condensed
Roman
Sans Serif
Courier
Micro Adjust
3sec
2-01
L
Blackberry REV.D
A5 size Chapter 2
96/04/08 pass 1
2-2
Using the Printer