Service manual

DIP Switches and Jumpers

This section describes the functions of the DIP switches and jumpers.

DIP Switches

The LQ-200/AP3000 has two sets of DIP switches underneath the cartridge slot cover.

Tables 1-10 through 1-15 describe the functions of these DIP switches. The printer reads

the DIP switch settings only at power on or after receiving the -INIT signal.

Table 1-10. Dip Switch Set 1

Notes:

1. When DIP switch 2-4 is on, you cannot create user defined characters.

2. When DIP switch 2-5 is on, you can select bidirectional graphics printing using ESC UO.

1-18