Manualshelf

Service manual

ManualsBrandsEpson ManualsComputer equipmentActionPrinter 3000 - ActionPrinter-3000 Impact Printer
131132133134135136137138139140
Disassembly and Assembly
Disassembling the ribbon feed mechanism
1.
Remove
the printer mechanism as described earlier in this chapter.
2.
Turn the printer mechanism upside down. Without removing the ribbon gear
cover, use a screwdriver to loosen the four bent tabs of the ribbon gear cover
slightly. (Do not remove the ribbon gear cover while the printer mechanism is
upside down, because the gears will scatter.>
Figure 3-28. Removing the Ribbon Gear Cover
3.
Turn the printer mechanism right side up, and remove the ribbon gear cover.
LQ-200/AP3000
3-33