Service manual

Disassembly and Assembly
Assembly Notes
l Before you install the carriage guide shaft and the head adjust lever,
position them as shown in Figure 3-24.
Figure 3-24. Carriage Guide Shaft and Head Adjust Lever
l The left carriage guide shaft lever is gray and the right one is black. For
each lever, slide the hole onto the corresponding shaft end.
l When you connect the head cable, be sure to pass it through the FFC guide
at the frame correctly.
Adjustment Required
After you assemble the carriage unit, adjust the platen gap as described in
Chapter 4.
LQ-200/AP3000
3-29