Manualshelf

Service manual

ManualsBrandsEpson ManualsComputer equipmentActionPrinter 3000 - ActionPrinter-3000 Impact Printer
121122123124125126127128129130
Disassembly and Assembly
Removing the carriage unit
1.
Remove the printer mechanism as described earlier in this chapter.
2.
Remove the printhead as described earlier in this chapter.
3.
Turn the printer mechanism upside down. Then manually move the carriage
unit
to
the cutout in the carriage motor frame. (Move the carriage unit until
you see the carriage unit and the timing belt join through the cutout.)
Figure 3-20.
Bottom
of
the Printer Mechanism
4.
Using round-nose pliers, detach the timing belt from the carriage unit. Be
careful not to damage the belt.
3-26
LQ-2OO/AP3000