Service manual

Disassembly and Assembly
CAUTION
When you loosen the tabs, push them gently to avoid damaging the lower case
or the printer mechanism.
a.
Loosen tabs 1 and 2. Then lift the left side of the frame about a half inch
(1 cm) up from the lower case.
b.
Loosen tab 3. Then lift the frame’s left side up another 2 inches (5 cm).
C.
Slide the printer mechanism in the direction indicated by the arrow in
Figure 3-12 and remove it from tabs 4 and 5.
Use tab 6 as a fulcrum.
Figure 3-12. Removing the Printer Mechanism
3-18
LQ-200/AP3000