Service manual

General Description
Specifications
This section provides the specifications for the LQ-200/AP3000.
Hardware Specifications
Printing Method Serial, impact, dot matrix
Pin Configuration
24 wires; 12 x 2 staggered, diameter 0.008 inches (0.2 mm)
Figure 1-2. Pin Configuration
Feeding Methods Friction feed, tractor feed
Line Spacing 1/6 inch or programmable in units of 1/180 inch
Paper Insertion From rear or bottom
Paper Feed Speed 100 ms/line at 1/6-inch line feed
2.2 inches per second, continuous feed
Paper Specifications See Tables 1-2, 1-3, and 1-4.
LQ-200/AP3000
1-3