User's Manual

Choosing a Place for the Printer
Note: If you plan to use a printer stand, follow these guidelines:
Use a stand that supports at least
11.6 kg (25½, lbs), which is
twice the weight of the printer.
Never use a stand that tilts the printer at an angle of more
than 15 degrees from horizontal. If you install a cut-sheet
feeder, keep your printer absolutely level.
If you position the paper supply below the printer stand, make
sure that you allow enough clearance
(25 mm or 1 inch) to
keep the paper from catching on
the underside of the stand.
Also see that the distance between the stand’s supports is at
least
280 mm (11 inches), to accommodate any paper size you
may use.
Position your printer’s power cord and interface cable so that
they do not interfere with paper feeding. If possible, secure
the
cables to the printer stand.
1-4 Setting Up the Printer