Specifications

EPSON ActionPC 8000, ActionTower 8000
System board components
J15
HDD LED connector
JP21
1 Pins 2-3: Turbo LED connector
S1
Pins 910: Hardware reset connector
Pins 11-13: Power LED connector
1 Pin 17-20: Speaker connector
1 Riser card slot; default settings of PCI AD Select care
U13, U14
Video DR
U15, U16
Soldered video RAM
U17, U22,
SIS 85C503, SIS85C501, CMD PCl0640B, and
I U33-U36,
I
U40-U43
U44
Cache ALT bit chip socket
SIMM Installation
The computer comes with 8MB of RAM standard on two
4MB SIMMs. You can increase the memory up to 128MB
using pairs of 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, or 64MB
SIMMs. The SIMMs must be tin-plated, 72-pin, single- or
double-sided, fast-page mode, parity or no-parity type with
an access speed of 70ns or faster. Be sure all the SIMMs
operate at the same speed.
The table below lists all the possible SIMM configurations; do
not install SIMMs in any other configuration.
SIMM configurations
Video Memory
The computer comes with 1MB of video memory. You can
increase the video memory to 2MB by installing two 512KB,
40-pin, SOJ flat pack video DRAM chips.
Video resolutions and colors
* Non-interlaced and interlaced
** lnterlaced
9/95
ActionPC 8000, ActionTower 8000 - 5