User`s guide

Exiting SETUP
When you leave SETUP, you can save your settings, or exit
SETUP without saving your settings. You can also return all
values to the factory defaults.
To leave SETUP, press E SC from any SETUP screen. From the
SETUP Main Menu, you can perform the following functions:
Load ROM
Default Values
Loads the factory default settings
stored in ROM back into CMOS.
If you change your system
configuration using the SETUP
program and then have problems,
you can load ROM values to boot
the system and start over.
Load Values
from CMOS
Loads the current values stored in
CMOS for all SETUP options. This
ignores any changes you have
made through SETUP.
Save Values to Saves the changes you have made
CMOS to your configuration to CMOS.
Press Esc to leave SETUP and restart your computer.
Running SETUP and Installing Drivers
2-15