User`s guide

Defining your own drive type
If the parameters for your hard disk do not match the
parameters detected by the auto-sensing feature, or if you want
to use your drive with parameters other than the defaults, you
can define your own drive type. (See Appendix A for a list of
predefined hard disk drive types and their parameters.)
To define your own drive type, follow these steps:
1. Move thecursor to Type and select User.
2. Type the values in each field that are appropriate for your
hard disk drive. Press Tab or ?’ and & to move the cursor to
the next field.
3. When you leave SETUP, make sure you save your changes.
Note
If you are going to install NetWare® 286, version 2.2, you
must enable the system shadow option. See page 2-7.
Using the Advanced System Setup Options
When you select the Advanced System Setup option from
the Main Menu, you see the Advanced System Setup screen.
From this screen, you can select options that allow you to
configure the computer’s cache memory and shadow memory,
and define the advanced chipset.
Your system can automatically configure the Advanced
lNde .. . . i
System Setup options for you. To avoid configuration
problems, you should let the system configure these options.
2-6 Running SETUP and Installing Drivers